Tuesday, 13 January 2009

Joined Together

What a difference a couple of hours make, the moulds are now joined, they seem to go together no problem, good job I know what I'm doing!

In the oven at 30 degrees for 24 hours then I will post cure them at 50 degrees for 10 hours so according to my watch they will be ready for de-moulding on Thursday night........not a bad turn around hey - less than a week to make a tailplane a week if you finish it with all the trimmings.
















Monday, 12 January 2009

New Tailplane....

Just a couple of photos of the new tailplane, it's now all ready with flashing trimmed, pins and captive nuts installed, straws cut to size and socks ready. This should go together tomorrow night and de-moulded on Thursday.......watch this space.






Fault?

Hey Mike, I am starting to get all the bits together to be ready for laying up the wings, I noticed that there seems to be a machining fault with one of the end blocks. Please see photo below.

I don't know if it's best that we leave it, as it will be a protrusion on the wing that can be sanded down or I can fill with epoxy & flocks and shape to profile.....what do you think??




Paint!

Here's a little something I noticed earlier, when I purchased the paint it was obvious that one was heavier than the other, given the same volume.

Below shows that the white paint is nearly 400g heavier!




Monday Evening

Hey guys, the latest from here.....I have taken the moulds out the oven and prepared them for joining tomorrow night, they look great so far for this stage so this looks like a keeper, call it a spare for stock?

I took a few pictures but there are errors when I try to upload them so I will try again later.

Sunday, 11 January 2009

Here we ago again!

Hey guys hope all is well.

In the oven is the new tailplane, so in 24 hours it will be ready to join together, the bags sealed perfectly this time, so lots of confidence this one will be the perfect test before the big one.

I weighed the top and bottom skins of the last tailplane and it weighed in at 80g, I know there is the weight of the resin, micro balloons and cotton flock to add but I have managed to reduce the weight of the current tailplane in the oven as the number of carbon tows in the spar has been reduced as the previous example was far too strong.

Andy is due to come visit for the weekend 24/25th Jan so two pairs of hands will see the first complete Zenith in the moulds! At last we are there......2009 watch out there is something in the air...is it a bird...is it a plane, hell no it's a god dam super plane!!

Peace out homies!

PS.. The home brew beer is now ready and tastes great, the last hydrometer reading measures it at 6.1%, the perfect accompaniment if not the main ingredient to a successful workshop session.

Friday, 9 January 2009

And then there was more
















some photos of my oven showing heating element, fan, insulation blanket and digital temp controls. Oven is good for 200 degrees c, and is big enough for all the moulds. Also photos of Joiner, joiner boxes and ballast tube which were all made last weekend.
Keep up the good work Harry. You don't have to sleep ing the workshop but it helps :o).