Had a few questions about badder moulding so heres a couple of photos showing the bladder and the finish I get. I am using pre preg material and ther is no gel coat or paint used to get this finish. The pre preg is cured in a oven at 120 degrees C for one hour, the bladders are pumped up to 100 PSI.
Friday, 9 January 2009
Thursday, 8 January 2009
Tailplanes
Tuesday, 6 January 2009
Tuesday Night
The oven has now been turned up to 50 degrees on the timer for 10 hours to post cure the resin, so should click off at 4.00am tomorrow morning. All being well I should laminate the balsa shear webs tomorrow ready for joining the moulds together on Thursday.
Almost there, lots of important lessons learnt and variations on techniques, almost ready for the big one!
Until soon, C YA!
Almost there, lots of important lessons learnt and variations on techniques, almost ready for the big one!
Until soon, C YA!
Monday, 5 January 2009
I'm back boys!
Hey you all!
Hope all is well.
I'm now back in the land of the living after being struck down by the dreaded man flu.
Friday night and Saturday saw me trying to make for lost time, I will be back in tonight putting in the spars and the inside layer of 25g glass cloth.
The new way of vac bagging will never be used again, it took 1.5 hours to make and seal the bags as they kept leaking. In the end I used the old butyl bags which proved again to be perfect.

Hope all is well.
I'm now back in the land of the living after being struck down by the dreaded man flu.
Friday night and Saturday saw me trying to make for lost time, I will be back in tonight putting in the spars and the inside layer of 25g glass cloth.
The new way of vac bagging will never be used again, it took 1.5 hours to make and seal the bags as they kept leaking. In the end I used the old butyl bags which proved again to be perfect.

Friday, 2 January 2009
Demoulding fus and bits
After a oven bake at gas mark 4 I demoulded the parts today.
Joiner first This looks perfect and lighter than other I have made and is still very strong.
Joiner boxes very good
Nose cone the best I have ever made, surface finish is excellent.
Fus is a little disapointing as the over lap seem has missed in two places but it is very strong and useable withy a little work to the seem line. Have learnt a lot about my new oven and have some thought about some new ideas for the fus moulding
All in all very positive and I am happy but still have to perfect the rear fus moulding.
Sorry no photos I can not find the camera, will post some as soon as I find the dam thing.
Harry Any news on the Tail Plane?
Joiner first This looks perfect and lighter than other I have made and is still very strong.
Joiner boxes very good
Nose cone the best I have ever made, surface finish is excellent.
Fus is a little disapointing as the over lap seem has missed in two places but it is very strong and useable withy a little work to the seem line. Have learnt a lot about my new oven and have some thought about some new ideas for the fus moulding
All in all very positive and I am happy but still have to perfect the rear fus moulding.
Sorry no photos I can not find the camera, will post some as soon as I find the dam thing.
Harry Any news on the Tail Plane?
Subscribe to:
Posts (Atom)
















